If you want to use a brake controller that does not require the use of the air brakes on your Mack Truck, then you can use an electric brake controller like # 90195. You will have to hardwire it to the vehicle and you will need a 7-Way trailer connector if your do not already have one.
I assume that on a truck of this size, you will have some type of trailer connector on it. It is just a matter of wiring it in correctly. On the brake controller, the white wire needs to be grounded to the... view full answer...
If your car hauler is an enclosed car hauler you can use it to move as long as you do not exceed the maximum tongue weight that your particular 2006 Ford F-450 and the gross combined weight rating of the vehicle. If your car hauler is an open car hauler (without rails) it is not a good idea to tow household cargo on it. I was able to find your owner's manual and the GCWR depends on the engine and transmission. The gross combined weight is the weight of the loaded vehicle, including passengers/cargo... view full answer...
There actually won't be any bolts needed at all for the hitch plate and pintle hook you mentioned. The reason is that you will weld on the Buyers Products Fabricators Hitch Plate # 3371809027A, and the mounting bolts actually come with the Pintle Hook # C48215. view full answer...
The best heavy-duty tarp option we have available for the 16 foot x 8 foot bed on your CHN Mack Dump Truck is with the Erickson Industrial-Grade # EM57045. This tarp measures 10 feet wide and 18 feet long which will give you a bit of slack to work with at each end of the bed. The integrated brass eyelets and steel D-rings that run along the outer edges of the tarp will allow you to tie the tarp down and secure it in place on your dump truck. view full answer...
I contacted Dexter Axle since they acquired Titan and they have not heard of the Titan series 80 actuator or coupler. The Repair Kit for Titan Couplers and Trailer Brake Actuators - 2-5/16" Ball part # T1848700 is the correct latch repair kit for the model 10, 20, some of the 60 series with 2-5/16 ball coupler.
The most popular series is the model 60, if you have the multi-fit model 60 the correct repair kit is Latch Repair Kit for Titan Multi-Fit Couplers and Brake Actuators part #... view full answer...
It sounds like you are referring to the inner arm bushings that come with the kit part # RM-910003-40. This kit is a fit for your Sterling and comes with the seals you referenced. view full answer...